MGH Marine Power Cable - Marine Power Cable - Hi-sea

MGH Marine Power Cable

[Search Related Products]

MGH Marine Power Cable

MGH Marine Power Cable

Standards : DIN 89160 


Halogen free cable is used for fixed laying on ships and off-shore units, use in all rooms and on open board, as power,signalling and control cables. A more specic design (e. g. screening) is necessary for installations in radio stations or above the upper metallic deck. The cables meet the ame test requirements for bunched cables acc. to IEC 60332-3 and IEEE 45-18.13, and perform to the SOLAS requirements. For xed installations on ships and offshore-units in all locations.Meet the Flame test requirements for bunched cables according to IEC 60332-3-22&IEEE 45-18.13.Free halogen materials ensures that non corrosive and low toxic gases are emitted in case of fire. All cables materials are free of halogens. This design ensures that non corrosive and low toxic gases are emitted in case of re. Therefore, these cables are especially suitable for the installation on passenger ships. 


1.Conductor : Annealed Stranded Bare Copper,Class 2 

2.Insulation : HEPR (Crosslinked Hard grade Ethylene Propylene) 

3.Filler or Tape 

4.Sheath : Polyolefin 

Picture of MGH

Electrical Characteristics

Rated Voltage Uo/U(Um):600/1000V

Test Voltage:3500V 

Usage Characteristics 

Flame Retardant:IEC 60332-3 Cat. A 

Smoke Density:IEC 61034 

Gases Corrosivity:IEC 60754-2 

Gases Toxicity:No toxicity to IEC 60754-1 

Minimum Internal Bending Radius

Cable Structure Cable Outer Diameter Minimum Bending Radius
Metal Braided Armored 6D
Non Armored D≤25 4D
D>25 6D

Contact with us now

Our mail: