Electric Anchoring Winch - Marine Electric Winch - Hi-sea

Electric Anchoring Winch


Electric Anchoring Winch


Electric Anchoring Winch



Application

Electric anchoring winch is a combination of anchor windlass and winch. It is an ideal choice to perform both anchoring and mooring functions in various types of vessels. It is equipped with single or double gypsy and it is driven by electric motor.

Advantages

1. Compact structure, high strength;

2. Excellent performance, exquisite appearance;

3. Corrosion resistance, long lifespan;

4. Reliable service, high security;

5. Easy installation, easy maintenance;

6. With or without warping head;

7. With single or double anchor chain gypsy;

8. Local control or remote control;

9. Manual or hydraulic clutch and brake;

10. General motor or explosion-proof motor;

11. Auto tension control, rope length or speed measurement;

12. Certificate: CCS, BV, LR...

Electric Anchoring Winch Structure

We not only provide customers with high-quality products, but also provide complete system solutions and added services for specific customers. Therefore, There are  high competitiveness.
Configuration options

Part Name

Type/Material

Advantages/Disadvantages

Drum

Q235-A

It has good toughness and plasticity, has a certain elongation, and has good weld-ability and hot work-ability. Q235A is generally used in the hot-rolled state. CCS no longer needed Q235A.

Q235-B

Has a certain elongation, strength, good toughness and cast-ability, easy to stamp and welding. Suitable for products with small loads.

Q345-B

Good comprehensive performance, good low temperature performance, good cold stamping performance, good welding performance and machinability. (High strength, good welding performance).

Warping head

ZG270-500

Medium carbon cast steel has certain toughness and plasticity, high strength and hardness, good machinability, acceptable weldability, and poor casting performance than low carbon steel. Casting defects cannot be avoided.

ZG270-500 Precision Casting

Cost-effective

Q345-B

The high strength of welding warping head.

Gypsy Wheel

Q345D

It has good comprehensive mechanical properties, good weldability, cold and hot workability and corrosion resistance, and has good low temperature toughness (high strength, good welding performance).

Reduction Gearbox

Domestic second-tier brands

Poor quality and short service life.

Domestic first-line brand

Cost-effective and long service life.

*Homemade (recommended)

Good quality, high cost.

Cluth

ZG270-500

Medium carbon cast steel has certain toughness and plasticity, high strength and hardness, good machinability, acceptable weldability, and poor casting performance than low carbon steel. Casting defects cannot be avoided.

Q345-B

Good quality, high cost.

45

Good cutting performance, high hardness after quenching, good toughness and certain wear resistance after quenching and tempering. Good quality, high cost.

Brake

Q345-B

CCS regulations

Electric Motor Type

HENGLI and LANHAI brand

Good quality, cost-effective, long service life. Self-contained brake, high safety.

ABB/WEG/Siemens

Good quality, high cost, long delivery time.

Other brands

High power consumption, relatively poor quality.

Pedestal

Q235-B

Suitable for products with small loads.

Q345-B

High strength and good welding performance.

Due to the fierce market competition, the phenomenon of low quality of other winch suppliers is frequent. What is the difference between us and other low-quality suppliers? 
The specific differences are as follows:

Part name

Other low quality suppliers

Result

Our factory

Consequence

Drum

To reduce costs, reduce the thickness of the drum.

The thickness of the drum is too thin, which is not conducive to the load and wears quickly.

Produced in strict accordance with product production standards, with moderate thickness.

The thickness is moderate, which is good for loading, wears slowly, and does not cause the product to be too heavy to increase the transportation cost.

Warping head

ZG270-500

Casting defects cannot be avoided

Q345-B

High welding strength and slow wear.

Gypsy Wheel

Cast iron

Cast iron has good casting performance, but when the carbon content of cast iron is relatively high, its performance is relatively brittle, and its tensile performance is relatively poor; it is easy to corrode and wear quickly, which is not conducive to load.

Q345D

The Q345D steel plate is preheated before welding to prevent the occurrence of cold cracks. And Q345D has good cold and hot working properties and corrosion resistance, and has good low temperature toughness. Conducive to load, slow wear.

Reduction Gearbox

Domestic second-tier brands

Poor quality and short service life.

Homemade or domestic first-line brands

Good quality and cost-effective.

Cluth

ZG270-500

Casting defects cannot be avoided.

Q345-B

Good quality and cost-effective.

Brake

Q345-B

Good quality and cost-effective.

Q345-B

Good quality and cost-effective.

Electric Motor Type

Other brands

High power consumption, relatively poor quality.

 

HENGLI or LANHAI brand

Cost-effective, good quality. Self-contained brake, high safety.

Pedestal

Q235-B

Low strength, suitable for products with small overload; Used for heavy loads winches, wear out quickly and break easily.

Q345-B

Higher strength, slower wear, not easy to break, suitable for both small and large load winches.

Main Parameter

Chain Dia Working Load Supporting Load Working Speed Mooring Pull Mooring Speed Drum Capacity Motor Power
mm kN kN m/min kN m/min m
kW
14/16/17.5 8.3/10.9/13.0 51/67/80 ≥9 8 ≥12 φ11*100 4.3/1.7
19/20.5/22 15.3/17.9/20.6 95/110/126 ≥9 15 ≥12 φ13*120 8.5/3.5
24/26 24.5/28.7 149/175 ≥9 20 ≥12 φ15*120
28/30 33.3/38.3 202/231 ≥9 30 ≥12 φ18*150 11/11/7.5
32/34/36 43.5/49.1/55.1 261/294/329 ≥9 40 ≥12 φ20.5*150 16/16/11
38/40/42 61.4/68.0/75.0 365/402/442 ≥9 50 ≥12 φ20.5*150 22/22/16
44/46/48 82.3/89.9/97.9 483/526/570 ≥9 60 ≥12 φ26*200 30/30/22
Above specifications only for reference, we can supply various winches according to your requirements.

Installation Process — Reference

1. The positioning of the base of the marine winch from the centre line of the ship, the frame number position and the height from the midline of the deck must meet the requirements of the base drawing.

2. The installation and inspection of the marine winch base are qualified.

3. When using a steel backing plate, the plane of the base fixing backing plate should be processed first, the flatness is ≤2mm, the surface roughness is Ra3.2, and the outward slope is 1:100.

4. After installing the marine winch, use the hanging wire method or the laser method to confirm the horizontal axis of the marine winch drum, the tolerance is 3mm/m, and the height and the distance from the midship position are ±5mm, and the inspection is qualified.

5. Whisk with steel backing plate.

6. Epoxy resin casting pad.

7. Prepare copper gaskets. Before the winch fixing bolts are tightened, check that the gap between the winch base and the base fixing pad is less than 0.5mm, and no gaskets are allowed; when it is greater than 0.5mm, it is allowed to have no more than 3 thin copper gaskets, and it is not allowed Use a half sheet of spacers.


Contact with us now

Our mail: hs@cqhisea.com

replace