Anti-soluble Compound Foam Fire Extinguishing Agent

Anti-soluble Compound Foam Fire Extinguishing Agent

I. Product overview

The compound anti-soluble foam fire extinguishing agent is made of polymer biological adhesive, fluorine surfactant, hydrocarbon surfactant, stabilizer, freezing resistance agent, solvent and other polymer raw materials, which is a multifunctional and universal foam fire extinguishing agent. Moreover, it is mainly used to extinguish the fires caused by ethanol, ether, aldehyde, ester, ketone, alcohol and other polar liquid (water-soluble) as well as the fires caused by mixture of any of the above two and the fires caused by non-polar liquid (for example, the fires caused by unleaded vehicle gasoline and various water-soluble liquid). In addition, it also can be used to extinguish the fires caused by Class A substance, so it is of the general performance of fire extinguishing. And it also is widely used in Class B fuel fire (in which, oil and polar solvents are mixed), so it is the preferred foam fire extinguishing agent for chemical plants, solvent factories, power plants, tunnels, ships, docks, oil fields and warehouses

Standard& Certificate:

Standard: GB15308-2006 Foam Fire Extinguishing Agent; GB/T19001-2016/ISO 9001:2015; GB15308-2006;GB/T24001-2016/ISO 14001:2015; GB/T28001-2011/OHSAS 18001:2007, etc.

Certificate: CCS

Fire extinguishing mechanism

While diffusing on the surface of combustion liquid, the foam of this foam fire extinguishing agent also can rapidly drain liquid to cool the surface of combustion liquid. Moreover, the rapid diffusion of foam layer prevents the further heating, vaporization and combustion of the combustion liquid. Furthermore, after absorbing the heat, the vaporized AFFF can dilute the oxygen content of the air on the surface of combustion liquid, which imposes a suffocation effect against the combustion liquid to prevent the combustion. In addition, this foam fire extinguishing agent can form a layer of aqueous film on the combustion liquid to seal the surface of combustion liquid together with the foam layer and polymer adhesive film, which will isolate the air and form the thermal insulation barrier. Therefore, it is of the advantages of both short fire extinguishing time and high fire extinguishing efficiency.

Detailed parameter:

Storage life: 6 to 8 years

Solidification point： -30℃ cold resistance, sea water resistance

Mixture ratio: fresh water and sea water in a ratio of 6:94

Storage volume (plastic barrel): 25kg、200kg、1000 kg

Storage temperature: -25℃ to +45℃

Applicable water category: fresh water and seawater, mixing ratio of 6%;

Freezing resistance, thawing resistance: no visible stratification and heterogeneous;

PH Value: 6.0-9.5

Diffusion coefficient: positive value

Corrosion rate / [mg/(d.dm2)] : Q235A steel sheet: ≤15.0; 3A21 aluminum sheet: ≤15.0;

Foaming expansion rate: ≥7.0;

Fire performance: Class IA, mandatory foaming, fire extinguishing time ≤3min, fire resistance time ≥10min, fire extinguishing time ≤3min, fire resistance time ≥15min;

Picture of anti-soluble compound foam fire extinguishing agent: