ZYG Series Hydrophore

ZYG Series Hydrophore

2. ZYG Series Hydrophore Main Technical Parameters

Model	Volume (m3)	Design Pressure (Mpa)	Working Pressure (Mpa)	Water Pump Model	Motor Power (kw)	Capacity (m3/h)	Pressure (Mpa)
ZYG-0.2	0.2	0.7	0.4	1.5CWX-2	2.2	3	0.4
ZYG-0.3	0.3
ZYG-0.5	0.5
ZYG-1.0	1
ZYG-1.5	1.5
ZYG-2.0	2
ZYG-2.5	2.5

3. ZYG Series Hydrophore Basic Dimension

Model	Overall Size(mm)				Base Size(mm)		Water Inlet	Water Outlet	Draining Outlet
	DN	L	B	H	A	B	DN
ZYG-0.2	500	1130	745	1635	1040	600	40	25	20
ZYG-0.3	600	1170	742	1690	1080	600		32	20
ZYG-0.5	700	1236	955	1920	1160	700		32	20
ZYG-1.0	900	1585	1216	2153	1510	960		40	20
ZYG-1.5	1000	1604	1310	2615	1600	1000		40	20
ZYG-2.0	1200	1812	1525	2473	1810	1220		40	25
ZYG-2.5	1200	1812	1525	2873	1810	1220		40	25

4. ZYG Series Hydrophore Maintenance
    (1) Check the tightness of connectors and cocks of suction pipeline so as to avoid the air is sucked in.
    (2) Check the tightness of charge valve
    (3) Check whether the pressure in tank is in control range. If the pressure is too low for a long time, please open the charge valve to fill in appropriate quantity of air.
    (4) Remove and clean the water tank regularly. After cleaning and brushing the inner wall, determine whether repaint according to flaking condition of painting. Repaint the out surface with anti-corrosive paint, meanwhile, replace wearing parts. After the spare parts are dry, reassemble it.
    (5) Speaking of maintenance of water pump, please see the instruction book of water pump.

5. Quantity be approved by IMO, all kinds class certificate can be supply.