Rudder Bearing
Rudder Bearing
Application
The rudder bearing is used to support the weight of the rudder stock and a rudder and to keep the hull watertight.According to the position,rudder bearings can be divided into upper and lower rudder bearing.
Features
1.Materials:stainless steel, forged steel, alloy steel.
2.Test:100% ultrasonic flaw detection test.
3.Products can be designed according to customers' drawings and parameters.
Main Technical Parameter
Nominal Diameter | D1 | D2 | D3 | D8 | A | B | C | E | H | t3 | b×h×1 |
D | |||||||||||
200 | 216 | 466 | 670 | 590 | 330 | 80 | 90 | 450 | 20 | 30 | 45×25×80 |
220 | 236 | 550 | 790 | 700 | 375 | 85 | 100 | 505 | 20 | 30 | 45×25×90 |
240 | 258 | 620 | 860 | 770 | 430 | 90 | 100 | 560 | 20 | 30 | 45×25×90 |
260 | 278 | 680 | 920 | 830 | 460 | 95 | 110 | 600 | 20 | 30 | 50×28×100 |
280 | 300 | 720 | 960 | 870 | 515 | 90 | 110 | 665 | 20 | 40 | 60×32×100 |
300 | 320 | 710 | 1110 | 940 | 545 | 95 | 120 | 705 | 20 | 40 | 60×32×110 |
320 | 342 | 780 | 1180 | 1010 | 570 | 100 | 120 | 730 | 25 | 40 | 60×32×120 |
340 | 362 | 840 | 1240 | 1070 | 630 | 105 | 130 | 800 | 25 | 40 | 60×32×120 |
360 | 384 | 900 | 1300 | 1130 | 690 | 90 | 130 | 880 | 25 | 60 | 60×32×130 |
380 | 404 | 960 | 1360 | 1190 | 755 | 95 | 140 | 955 | 25 | 60 | 60×32×130 |
400 | 426 | 960 | 1360 | 1190 | 600 | 110 | 140 | 800 | 25 | 60 | 70×36×130 |
420 | 446 | 1020 | 1420 | 1250 | 635 | 110 | 150 | 845 | 30 | 60 | 70×36×140 |
440 | 468 | 1080 | 1480 | 1310 | 665 | 105 | 150 | 885 | 30 | 70 | 70×36×140 |
460 | 488 | 1140 | 1540 | 1370 | 700 | 110 | 160 | 930 | 30 | 70 | 70×36×150 |
480 | 510 | 1210 | 1610 | 1440 | 730 | 115 | 160 | 960 | 30 | 70 | 80×40×150 |
500 | 530 | 1270 | 1670 | 1500 | 760 | 120 | 170 | 1000 | 30 | 70 | 80×40×160 |
Certificates
The products approved by CCS,DNV-GL,BV,ABS,NK,RINA,etc.