DIN Marine Valve - DIN Marine Valve - Hi-sea

DIN Marine Valve

DIN Marine Valve

1.DIN Marine Valve Introduction:

DIN Marine Valves refer to a range of valves that comply with the standards established by the Deutsches Institut für Normung (DIN), a German organization that develops and publishes technical standards for various industries.

These valves are specifically designed for marine applications and are commonly used in ships, offshore platforms, and other marine vessels. They are typically made from high-quality materials such as brass, bronze, and stainless steel to withstand harsh marine environments and corrosion.

DIN Marine Valves come in different types, including gate valves, globe valves, check valves, butterfly valves, and ball valves. Each type is designed for specific functions, such as regulating or controlling the flow of fluids or gases, preventing backflow, or isolating equipment.

2. Features

DIN Marine Valves are recognized for their high performance, durability, and reliability, and are widely used in the marine industry due to their compliance with international standards and regulations.

3.DIN Marine Valve Classification:

DIN Marine Valve

Bronze DIN Marine Valve

Cast Iron DIN  Marine Valve

Cast Steel DIN Marine Valve

Main Products:



Bronze DIN Marine Valve

Marine DIN Bronze Check Valve, Marine DIN Bronze Globe Valve, Marine DIN Bronze Angle Globe Valve, Marine DIN Bronze Gate Valve, Marine DIN Bronze Angle Fire Valve, Marine DIN Bronze Fire Valve.

Cast Iron DIN Marine Valve

Marine DIN Cast Iron Check Valve, Marine DIN Cast Iron Angle Check Valve, Marine DIN Cast Globe Valve, Marine DIN Cast Iron Angle Globe Valve, Marine DIN Cast Iron Gate Valve, Marine DIN Cast Steel Gate Valve.

Cast Steel DIN Marine Valve

Marine DIN Cast Steel Check Valve, Marine DIN Cast Steel Angle Check Valve, Marine DIN Cast Steel Globe Valve, Marine DIN Cast Steel Angle Globe Valve.

4. DIN Marine Valve Assembly:

DIN Marine Valve Body

DIN Marine Valve Disc

DIN Marine Valve Hand Wheel

DIN Marine Valve Seat

DIN Marine Valve Finished Product

5.
Specific Difference Between Us and Other Suppliers:

Comparison

Product Picture of other low quality supplier


Product Picture of our factory


Other low quality supplier

Consequence

Our Factory

Result

In order to reduce costs, omit raw materials and reduce internal quality, resulting in the thin wall of the valve body that accounts for the main body of the valve.

Leaving a safety hazard, the thin wall is easy to break or leak the valve at high temperature and high pressure or during operation.

Strictly in accordance with the standard processing, uniform thickness, uniform material.

Use with confidence, meet user needs, and the product has a long service life

The valve cover is of poor manufacturing quality, uneven thickness, and uneven material.

Bonnets are prone to breakage, blisters, corrosion or aging.

Strictly in accordance with the standard processing, uniform thickness, uniform material.

The quality of the valve cover is good, it is not easy to generate air holes, and the product has a long service life.

For refurbished valves, some operators sell the waste valves for the second time after repainting them, which brings serious safety hazards to the quality of the project.

Refurbished valves are easy to cause the shell to crack, and the phenomenon of running, running, dripping and leaking occurs, and in severe cases, the oil and gas pipelines will explode.

Manufacture brand new valves in strict accordance with customer material requirements, never shoddy.

Meet the hardness and precision requirements of standard valves,

The quality of flange manufacturing is poor, and there are problems such as cracks, pores, and insufficient thickness.

As a result, the valve is wear-resistant, the pressure bearing is poor, the valve is prone to quality problems, and the service life is short.

Materials are selected strictly in accordance with national standards.

Ensure the quality of the valve and ensure the normal operation of the equipment.

Replace the copper stem with an iron-copper-plated stem.

The performance of the substitute material is unstable, resulting in a decrease in the quality of the valve.

The material is selected in strict accordance with user requirements.

The valve is wear-resistant, has good pressure-bearing performance, and is not easy to be damaged.

The packing quality is poor, and there are defects such as loose packing, burrs, dryness, impurities, etc.

Lead to packing failure, easy to produce medium leakage, valve easy to malfunction.

High-quality fillers are selected, and there is no loose, impurity and other phenomena.

High safety factor, reasonable structure, long product life

The hardness of the valve stem is too low, there are cracks, the valve stem is not round, and the valve stem is not bent straight.

The stem sealing surface is easily damaged and the valve service life is short.

Materials are selected according to standards and customer requirements.

The valve has good sealing and wear resistance, and it is not easy to cause leakage of the medium, and the valve has a longer service life.

6. Our Inventory:


Contact with us now

Our mail: hs@cqhisea.com

replace