FRP full frame cooling tower

Design instructions

(1) The zero plane position in the pool, the size and location of the outlet pipe, sewage discharge and emptying are all determined by the demand side according to the actual situation.

(2) The water pressure at the zero plane of the tower body should be 0.08-0.15MPa.

(3) Water quality requirements: no large mechanical impurities, the particle size of mechanical impurities is less than 10 mm.

(4) The above parameters are only for reference in the selection of industrial medium-temperature cooling towers. The design of low-temperature and high-temperature cooling towers should be adjusted appropriately.

Standard design conditions

(1) Dry bulb temperature: θ= 31.5 ℃, wet bulb temperature τ= 28 ℃, atmospheric pressure P = 9.94 *104Pa

(2) Influent temperature t1=43 ℃, effluent temperature t2=33 ℃

Specification

Model	Cooling water volume (m³/h)	Fan			Water collector (㎡)	Influent main (DN)	Standard point noise dB(A)	Tower size
		model	Air flow (Q×104m³/h)	power (KW)				H1 (mm)	H2 (mm)	H3 (mm)	a (mm)	b (mm)
WBBF-50	50	LYD-16A	5.9	3	6.3	80	60	1000	3300	600	2500	2500
WBBF -100	100	LYD-24A	8.4	5.5	10.2	150	63	1000	3300	700	3200	3200
WBBF -150	150	LYD-28A	11.8	7.5	16	150	63	1100	3300	700	4000	4000
WBBF -200	200	LYD-34A	16.8	7.5	19.4	200	65	1200	3300	700	4400	4400
WBBF -250	250	LYD-34B	18.74	7.5	25	200	66	1200	3300	700	5000	5000
WBBF -300	300	LYD-38A	21.2	11	31.4	250	66	1300	3300	800	5600	5600
WBBF -350	350	LYD-38B	23.53	11	33.6	250	66	1300	3300	800	5800	5800
WBBF -400	400	LYD-42A	30.22	15	36	250	66	1400	3300	900	6000	6000
WBBF -500	500	LYD-50A	35.32	18.5	43.6	300	68	1500	4000	1200	6600	6600
WBBF -600	600	LYD-50B	40.8	22	53.3	350	68	1600	4000	1500	7300	7300
WBBF -700	700	LYD-60A	49.35	22	70.6	350	69	1800	4000	1500	8400	8400
WBBF -800	800	LYD-60B	54.5	30	81	400	70	2000	4000	1500	9000	9000