Class A Environmentally Friendly Extinguishing Foam Agent(MJABP) - Fire Extinguishing Agent - Hi-sea

Class A Environmentally Friendly Extinguishing Foam Agent(MJABP)


Class A Environmentally Friendly Extinguishing Foam Agent(MJABP)

Product overview:

The Class A foam fire extinguishing agent is featured as fast firefighting speed, high water efficiency, thermal insulation, long wall-hanging time, remarkable anti-recombustion effect, which can greatly reduce the loss of water on fire site. Moreover, due to the fullness, fineness, good durability and high moisture content of its foam, it can form thick foam layer on vertical & other angular surface and even on the top of residence building.

This product is featured as stable foam, high fire extinguishing efficiency and good re-combustion prevention effect, which is a desired product to extinguish the fires caused by Class A substance. In addition, it is applicable to various Class A fires caused by rubbers, coals, papers and building materials.

Principle of Class A foam fire extinguishing agent :

Class A foam fire extinguishing agent can form an aqueous film thermal insulation layer on the surface of combustion substance, whose foam is stable, durable and balanced in drainage. Furthermore, this agent is of good wetting and permeability which can penetrates into deep cracks of solid combustion substance to extinguish the smoldering fire, achieving complete fire extinguishing without re-combustion.

Standard& Certificate:

Standard: GB/T19001-2016/ISO 9001:2015; GB15308-2006; GB/T24001-2016/ISO 14001:2015; GB/T28001-2011/OHSAS 18001:2007, GB27897-2011 Class A Form Fire Extinguishing Agent, GB27897-2011, etc.

Certificate: CCS

Specification:

Package in plastic barrel volume: 25kg, 200kg, or 1,000kg.

Storage temperature : -25℃ to 45℃

Storage life: 10 years

Specification and model

Solidification point (eigenvalue) : ≤-30℃

Freezing resistance, thawing resistance: no visible stratification and heterogeneous;

PH value (before and after temperature treatment): 7.9 to 8.2;

Corrosion rate / [mg/(d.dm2)] : Q235A steel sheet: ≤0.4; 3A21 aluminum sheet: ≤0.1;

Surface tension≤20.9mN/m

Wettability: under mixing ratio of 1.0%, wetting time ≤5.0s;

The 25% drainage time (before temperature treatment): ≥ 12.0min;

Thermal insulation protection performance: 25% drainage time ≥30.0min, and foaming expansion rate ≥30.2;

Performance in extinguishing Class A fires: fire extinguishing time ≤80.0s, and anti-recombustion time ≥10.0min;

Performance in extinguishing non-aqueous-soluble liquid fires: fire extinguishing performance class ≥ IB;

Picture of Class A foam fire extinguishing agent:

Contact with us now

Our mail: hs@cqhisea.com

replace