Fluoro-protein and Protein Foam Concentrate - Fire Extinguishing Agent - Hi-sea

MARINE & OFFSHORE EQUIPMENT

INDUSTRY EQUIPMENT

STOCK LIST

Contacts

tel. Tel:+86-23-67956606
tel. FAX:+86-23-67956622
email Email:manager@cqhisea.com

Working Time: 9:00--17:00

Working Day: Monday to Friday Website: www.cqhisea.com




Home > Fire Extinguishing Agent

Fluoro-protein and Protein Foam Concentrate

Fluoro-protein and Protein Foam Concentrate

Description：

Fluoro-protein and protein foam fire extinguishing agent is based on protein foam fire extinguishing agent. It is formulated with appropriate addition of fluorocarbon surfactants. Compared with protein foam fire extinguishing agent, because of its reduced surface tension and interfacial tension, low shear stress, good fluidity, strong oleophobic ability, and high oil pollution resistance, the fire extinguishing time of this fire extinguishing agent is shortened by 1/3~ 1/2, it can use submerged jet to save large oil tank fires, and can be used in combination with dry powder fire extinguishing agents.

This product can be mixed with water in the ratio of 3:97 or 6:94 in low-expansion foam generating equipment to produce foam fire extinguishing. It is used for the rescue and prevention of large oil fires such as oil fields, oil depots, petrochemical enterprises, ships, and airports.

The technical performance indicators of this product are in accordance with the national

The product should be sealed and stored in a cool, dry and ventilated place indoors. The storage temperature should be lower than 45°C and higher than its minimum use temperature. The validity period is two years.

This product is suitable for fresh water and sea water, not affected by freezing and thawing, and can prepare cold-resistant products for you according to user needs

Standard& Certificate:

Standard: GB15308-2006 Foam Fire Extinguishing Agent; GB/T19001-2016/ISO 9001:2015; GB15308-2006;GB/T24001-2016/ISO 14001:2015; GB/T28001-2011/OHSAS 18001:2007; MSC.327(90); MSC.339(91; MSC.1/Circ.1312, etc.

Certificate: CCS

Specification：

Model

Mixture ratio

Solidification point & Applicable water category

3%(FP)

3%

-20℃ sea water resistance

6%(FP)

6%

-10℃ sea water resistance

Item

condition

parameter

Solidification point

before temperature treatment

0-4℃(eigenvalue)

Freezing resistance & thawing resistance

before and after temperature treatment

no visible stratification and heterogeneous

Fluidity

before and after temperature treatment

The flow rate of the foam liquid≥the flow rate of the standard reference liquid or the viscosity value of the foam liquid≤the viscosity value of the standard reference liquid

Sediment (%)

before aging

≤0.25；Precipitate can pass through 180μm sieve

After aging

≤1.0；Precipitate can pass through 180μm sieve

pH Value

before and after temperature treatment

6.0～9.5

Corrosion rate / [mg/(d.dm2)]

before temperature treatment

Q235A steel sheet: ≤15.0, LF21aluminum sheet: ≤15.0

Foaming expansion rate

before and after temperature treatment

The deviation from the eigenvalue≤1.0 or≤20% of the eigenvalue, which is determined by the larger of the above two differences

The 25% drainage time

before and after temperature treatment

The deviation from the eigenvalue≤20%

Fire extinguishing performance

IIA Class

fire extinguishing time ≤4min

Anti-burn time ≥10min

Picture of fluoro-protein and protein foam fire extinguishing agent:


Related products for "Fluoro-protein and Protein Foam Concentrate"

Contact with us now

Our mail: hs@cqhisea.com

replace