CKJPFP Screened Marine Control and Instrumentation Cable - Marine Control Cable - Hi-sea

CKJPFP Screened Marine Control and Instrumentation Cable

CKJPFP Screened Marine Control and Instrumentation Cable

Applications:
This product is used in ships,petrol platforms and offshore buildings for power,light and control systems,usually used for fixed installation in most areas and open deck in ships.If the cable is exposed to direct sun light protective covering or cable with black outer sheath is recommended.

Constructions:
1.Conductor
Stranded copper wire Class 2
Annealed stranded copper wire on request.
2.Insulation XLPE
3.Bedding Separate tape
4.Sheath Polyolefine Plastic(SHF1)

Applied Standards:

Design IEC 60092-376
Conductor IEC 60228 Class 2
Insulation IEC 60092-351
Sheath IEC 60092-359
Flame-retardant IEC 60332-1-2 -test for single insulated wire and cable IEC 60332-3-22 -test for bunched wires and cables, category A
Halogen-free IEC 60754 series
Smoke emission IEC 61034 series

Service Conditions:
1.Rated Voltage:U0/U 250/350V
2.long time working temperature 90℃
3.Minimum recommended installation temperature -15 °C
Lowest operation temperature -40 °C
4.flexible cables for mobile devices,the other cables are fixed laying cable bending radius while laying is as below
Cable Structure Cable Outer Diameter Minimum Bending Radius
Metal Braided Armored
6D
Non Armored D≤25 4D
D>25 6D

Contact with us now

Our mail: hs@cqhisea.com

replace