CJPFP Fire Resistant Screened Marine Power and Control Cable - Marine Power Cable - Hi-sea

CJPFP Fire Resistant Screened Marine Power and Control Cable

CJPFP Fire Resistant Screened Marine Power and Control Cable

Applications:

CJPFP Fire Resistant Screened Marine Power and Control Cable 0.6/1KV,this cable is intended for fixed installation in most areas and on open deck ships,petrol platforms and offshore buildings for power,light and control systems,especially when lightweight cables needed.If the cable is exposed to direct sun light protective covering or cable with black outer sheath is recommended.

Applied Standards:

Construction: IEC 60092-353

Conductor: IEC 60028 Class 2,Class 5

Insulation: IEC 60092-351

Sheath: IEC 60092-359

Flame Retardant: IEC 60332-3-22

Low Smoke: IEC 61034

Halogen Index:IEC 60754

Constructions:

Conductor Bare Copper Wire/Tinned copper wire
Insulation Mica tape+XLPE
Screen drain of tinned copper wire(1mm2 for all sizes)
Sheath Polyolefine Plastic(SHF1)

Service Conditions:

1.Rated Voltage:0.6/1KV

2.long time working temperature 90℃

3.Minimum recommended installation temperature -15 °C

Lowest operation temperature -40 °C

4.flexible cables for mobile devices,the other cables are fixed laying cable bending radius while laying is as below


Cable Structure Cable Outer Diameter Minimum Bending Radius
Metal Braided Armored 6D
Non Armored D≤25 4D
D>25 6D

Contact with us now

Our mail: hs@cqhisea.com

replace