CHJP86 Armoured Instrumentation and Communication Cable

CHJP86 Armoured Instrumentation and Communication Cable

Applications:

This product is used in ships,petrol platforms and offshore buildings for power,light and control systems,usually used for fixed installation in most areas and open deck in ships.If the cable is exposed to direct sun light protective covering or cable with black outer sheath is recommended.

Constructions:

1.Conductor -Stranded copper wire

2.Insulation

-XLPE

3.Twisted pair

- two insulated cores twisted together to form a pair

- plastic coated aluminium tape and a tinned copper drain wire

4. Bedding - filler tape

5. Armor

- drain wire copper (in all sizes)

- copper wire braid, coverage >94% EC 60092-350

- tinned copper wire braid on request

6. Sheath

- polyolefine plastic, SHF1 EC 60092-359

- on request, thermosetting polyolefine, SHF2

- standard colour grey, other colours on request

Applied Standards:

Design	IEC 60092-353
Conductor	IEC 60228 Class 2
Insulation	IEC 60092-351
Sheath	IEC 60092-359
Flame-retardant	IEC 60332-1-2 -test for single insulated wire and cable IEC 60332-3-22 -test for bunched wires and cables, category A
Halogen-free	IEC 60754 series
Smoke emission	IEC 61034 series
Transfer Impedance	IEC 61196-1 (typical value 26dB over 1mΩ/m at 100MHz [20mΩ/m])

Electrical data:

Loop resistance of pair, max. / +20°C Pair capacitance, nom. / 800Hz Loop inductance, nom. Insulation resistance / +20°C

Service Conditions:

1.Rated Voltage:150/250V(300V)

2.long time working temperature 90℃

3.Minimum recommended installation temperature -15 °C Lowest operation temperature -40 °C

4.flexible cables for mobile devices,the other cables are fixed laying cable bending radius while laying is as below

Cable Structure	Cable Outer Diameter	Minimum Bending Radius
Metal Braided Armored		6D
Non Armored	D≤25	4D
	D>25	6D