8000L HM Automatic Oil Separator Unit - Marine Oil Separator - Hi-sea

8000L HM Automatic Oil Separator Unit

8000L HM Automatic Oil Separator Unit

Product Description

The separator is a component operating in an integrated system including a monitoring system.

Basic Principles of Separation

The purpose of separation can be to free a liquid of solid particles; separate two mutually liquids with different densities while removing any solids present at the same time; separate and concentrate solid particles from a liquid.

Operation Limits

Feed temperature:0℃ to+100℃

Ambient temperature: +5℃ to +55℃

Discharge Intervals: 2 minutes to 4 hours

Maximum allowed density of operating liquid: 100Kg/m³

Viscosity max. 600 cSt at 50℃

Max. Light phase density, mineral oil/fresh water separation: 991 KG/m³ at 15℃

Max. Allowed speed: 12450r/minute

Not to be used for liquids with flashpoint below 60℃

Risk for corrosion and erosion has to be investigated in each case by the application centre.

Remote restart allowed under certain conditions, see interface description.

Technical Data

General technical data
Motor power: 50Hz/60Hz Value Unit
Gear ratio 283/70 50Hz
Gear ratio 235/70 60Hz
Alarm levels for vibration monitor, connection 752,1st/2nd 0,15/0,3 mm
Bowl max. inner diameter 208,5 mm
Discharge interval, min./max. 2/240 minutes
Max. density of operating liquid 1000 Kg/m³
Max. density of feed/sediment 1100/2367 Kg/m³
Min./Max. ratio of density 0,795/0,977
Feed temperature, min./max. 0/100
Max. running time without flow,
empty bowl 30 minutes
filled bowl 30 minutes
Bowl body material AL 111 2377-02
Other metallic materials than stainless steel in bowl: Yes

IACS Certificate Options: BV, CCS.


Contact with us now

Our mail: hs@cqhisea.com

replace