2.5 m³ Hot Well Unit Module - Marine Hot Well Unit - Hi-sea

2.5 m³ Hot Well Unit Module


2.5 m³ Hot Well Unit Module

Application

Marine hot well units are suitable for steam condensate and boiler feed water systems of ships and drilling platforms. It is an indispensable equipment for steam condensate closed loop circulation system.

Technical Specifications
Type Hot-well Capacity m³ Cooled Area ㎡ Outline Dimension
2.5 2.5 18.0 2200*1800*1950
System Composition and Working Principle

The unit is composed of base, marine atmospheric condenser, condensate observation cabinet, hot water well, automatic water supply valve, thermometer, liquid level controller, valve and so on.

The unit is a necessary part of the condensate water closed circulation system. The remaining steam produced by the boiler and the condensed water produced when the steam is used in the unit is cooled through the atmospheric condenser and then flowed into the hot well device. The condensate in the hot water well is filtered to remove oil and other impurities, and then pressurized by the boiler feed pump into the boiler supply system to continue circulation, to achieve the purpose of saving fresh water.Realize the heat exchange function of the whole system.


Contact with us now

Our mail: hs@cqhisea.com

replace