MARINE & OFFSHORE EQUIPMENT
- Dredging Equipment
- Marine Deck Machinery
- Marine Mooring Equipment
- Aquaculture Equipment
- Marine Outfitting Equipment
- Marine Propulsion Equipment
- Marine Oil Painting
-
Marine Auxiliary Machinery
- Marine Air Compressor
- Marine Air Receiver
- Marine Sewage Treatment Plant
- Marine Generator Set
- Marine Oil Water Separator
- Ballast Water Management System
- Marine Hydrophore
- Marine Calorifier
- Seawater Desalination Plant
- Marine Oil Separator
- Marine Fuel Oil Supply Unit
- Marine Heat Exchanger
- Marine Hot Well Unit
- Marine Incinerator
- Marine Boiler
- Sewage Collecting Tank
- Marine Valve & Accessories
- Marine Pump
- Marine Life-saving Equipment
- Fire-fighting Equipment
- Marine Cable
- Marine Electrical Equipment
- Marine HVAC
-
Labour Protection Appliance
-
Marine Anode
- Marine Pipe Fitting & Flange
- Ship Building Equipment
INDUSTRY EQUIPMENT
- Hoisting Equipment
- Welding Machine & Material
-
Cutting Machine
-
Container Securing Fitting
- Link Chain
- Container & Storage Equipment
-
Generator Set
- Other Equipment and Tools
- Petrochemical Equipment
- Fiber Reinforced Plastics
- Polymer Materials
- Environmental Protection Series
- Geo-products and Building Materials
STOCK LIST
Contacts
Tel:+86-23-67956606
FAX:+86-23-67956622
Email:hs@cqhisea.com
Working Time: 9:00--17:00
Working Day: Monday to Friday Website: www.cqhisea.com
Ventilation Tube
Ventilation Tube
1. Application
The air duct is mainly used to connect the air circulation between two places and play the role of ventilation. The most widely used in the market is the spiral duct.
2. Type Identification Method
Duct Rd × L
For example: the duct with the 500mm diameter and the 6m lengths is identified as R500 × 6.
Pre-heat insulation duct: PRd × L
NOTE: (1). Normal: L=(max)400/each
(2). Insulation materials: mineral wool, rubber and plastic or glass fiber
(3). Thickness of insulation: δ=12.5mm δ=15mm or 25mm, unless otherwise stated, then δ=12.5mm.
3. Dimension Table
Non-heat insulation spiral duct (R)
|
Specifications |
Internal dia. DN |
Wgt. Kg/m |
|
R80 |
80 |
1.35 |
|
R100 |
100 |
169 |
|
R125 |
125 |
2.11 |
|
R150 |
150 |
2.53 |
|
R160 |
160 |
2.69 |
|
R175 |
175 |
3.36 |
|
R200 |
200 |
4.20 |
|
R250 |
250 |
5.03 |
|
R300 |
300 |
6.72 |
|
R400 |
400 |
11.20 |
|
R500 |
500 |
14.12 |
|
R600 |
600 |
17.74 |
(2). Material thickness is according to GB 50243 or determined by customers.
4. Drawing
