Marine Sliding Chair

Marine Sliding Chair

Material:

1. Rail Slide and positioning base use high strength aluminum alloy, and inside and outside decorative mosaic is made of stainless steel;

2. Lifting column is made of steel, stainless steel synthetic;

3. Steel structure is used for seat lifting and tilting, moving back and forth, back angle adjusting;

4. The seat back and the seat cushion use steel inner core and PU cold foam one-time forming sponge synthetic, and surface is leather or cloth;

5. Pedals use steel plate inner core and environmentally friendly rubber synthetic;

6. German Stabilus is used in pneumatic lifting core components pneumatic bar.

Function:

1. Ergonomic design;

2. Movable seat on high strength double slide rails;

3. Adjustable backrest and headrest;

4. Angle adjustable of seat height ;

5. Seats can be moved back and forth;

6. Foldable/angle-adjustable and comfortable seat armrests;

7. Seat can rotate 360 degrees, multi-point positioning;

8. Foot pedal height adjustable / foldable;

9. Column can go up and down vertically.

Function data:

1. Upper part of the seat can move back and forth 120mm; the height adjustment range is 60mm, and seat inclination angle ranges ±12°;

2. Seat backrest adjustable angle is 85°-150°; headrest can adjust up and down 50mm, and the armrest is controlled by multi-point positioning;

3. The seat pneumatic lifting regulating ranges 0-150mm;

4. The seat can rotate 360°and it can be locked, controlled by 4-point positioning;

5. Seat can slide 0-5000mm on the sliding rails, which is 500mm in width and 28mm in depth;

6. Seat pedal can rotate 90°, with up and down position adjustment ranging 0-50mm;

7. Seat can bear more than 150FT.LB torsion, reaching AD grade standard.

IACS Certificate: CCS Type Approval.

Picture of  Marine Sliding Chair: