Marine Butterfly Valve - GB Marine Valve - Hi-sea

Marine Butterfly Valve

Marine Butterfly Valve

Introduction

A marine butterfly valve is a type of valve commonly used in marine applications to regulate or control the flow of fluids, such as water, oil, or gas. It is named after its shape, which resembles a butterfly, with a circular disc that rotates to allow or restrict the flow of fluid through the valve.

One of the advantages of the marine butterfly valve is its compact size and low weight, which makes it suitable for use in marine applications where space is limited. It also has a lower pressure drop compared to other types of valves, which means that it can handle higher flow rates with less resistance.

Overall, the marine butterfly valve is a commonly used valve in marine applications due to its compact size, low weight, and low pressure drop. However, its use should be carefully considered based on the specific application and operating conditions.

Feature

1. Corrosion-resistant: Marine butterfly valves are made from materials that are resistant to corrosion caused by seawater and other marine elements.

2. High-strength: The valves are designed to withstand high pressures and extreme temperatures, making them ideal for use in harsh marine environments.

3. Low maintenance: Marine butterfly valves require minimal maintenance, thanks to their simple design and high-quality materials.

4. Easy to operate: The valves are designed for easy operation, with a simple lever or gear mechanism that can be easily turned by hand.

5. Wide range of applications: Marine butterfly valves can be used for a variety of applications, including controlling the flow of water, fuel, and other fluids in marine vessels.

6. Durable: These valves are built to last, with rugged construction that can withstand the rigors of marine environments.

7. High flow capacity: The valves are designed for high flow capacity, allowing for the quick and efficient transfer of fluids.

8. Cost-effective: Marine butterfly valves are a cost-effective solution for controlling fluid flow in marine vessels, with a low initial cost and minimal maintenance requirements.


Configuration Options

Name of Parts

Material

Advantages/Disadvantages

Valve Body

Grey cast iron

The most common material in butterfly valves, mainly used in water systems, is easily corroded, has a short service life and is cheap.

Ductile cast iron

The performance of the butterfly valve is comparable to that of carbon steel. It is generally used in water system pipes, and it is also a very widely used material in water systems at present.

Carbon steel

It can also be used in water systems, but it is not used much. Carbon steel butterfly valves have high temperature and pressure resistance. Generally, hard-sealed butterfly valves are mostly made of carbon steel.

Stainless Steel

It has good anti-corrosion and anti-corrosion properties, and is also mostly used in pipelines that need anti-corrosion and anti-rust, and the cost is relatively high.

Valve Disc

Stainless Steel

Stainless steel has a strong ability to resist tension, wear and corrosion. Stainless steel is much stronger than copper in material. Stainless steel will not produce corrosion, pitting, rust or wear and high temperature resistance.

Bronze

Bronze has excellent low temperature resistance, good corrosion resistance, wear resistance, casting and excellent mechanical properties

Valve Seat

EPDM

Suitable medium -20-120℃ water, steam, etc

NBR

Applicable medium 0-80℃ oil class

PTFE

Applicable to corrosive media below 200℃

Hard alloy

Suitable for high temperature and high pressure environment

Hand Wheel

Cast Iron

Cost less than bronze and cast steel

Specific Differences Between us and Other Suppliers

Comparison

Product Picture of other low quality supplier


Product Picture of our factory


Other low quality supplier

Consequence

Our Factory

Result

In order to reduce costs, omit raw materials and reduce internal quality, resulting in the thin wall of the valve body that occupies the main body of the valve.

Leaving a safety hazard, the thin wall is easy to break or leak the valve at high temperature and high pressure or during operation.

Strictly in accordance with the standard processing, uniform thickness, and material

Use with confidence, meet user needs, and the product has a long service life

Rubber valve seat is made of waste rubber

Not durable and waste of resources, once the valve seat is worn and damaged, the entire valve is considered waste

The rubber valve seat is made of a new type of super wear-resistant rubber, and can be reused

The rubber material is super wear-resistant and can be reused, and the valve can be used for a longer time

The valve seat, valve stem, and valve disc are all fixed configurations, which cannot be disassembled and assembled individually, and cannot be replaced with individual parts.

If a part is damaged, it can only be replaced as a whole, wasting resources and increasing costs

Seat, stem and disc are standard parts

Replacing accessories is simple and easy, saving time and effort. Not only reduce costs, but also save resources for the country

Outline Drawing


Specifications

IACS Certificate BV, RINA, KR, DNV, CCS, LR, ABS, NK.

Contact with us now

Our mail: hs@cqhisea.com

replace