Marine Bronze Gate Valve - Marine Gate Valve - Hi-sea

Marine Bronze Gate Valve

Marine Bronze Gate Valve

Introduction:

Bronze gate valve, with excellent wear resistance and corrosion resistance, good casting performance, is widely used in high load parts, such as bearing bush, pump body, marine screw, petrochemical industry, shipbuilding industry, etc.

Size: 5K15-5K65

Standard: JIS F7367

Certification: ISO9001, CCS, NK, KR, LR, ABS, DNV, RINA, etc.

Flange standard: JIS B2220 5K

Application:use for marine pipelines of fresh water, air or gas, fuel oil, lub oil, steam at 205℃ in ship building or repair or marine platform construction.

Configuration Selection:

Part name

Material

Advantages / Disadvantages

Valve Body

Bronze

1. Seawater corrosion resistance;
2. The price is slightly higher than that of cast steel and cast iron;

Cast Steel

1. High mechanical strength and toughness;
2. It has special properties such as heat resistance, corrosion resistance and wear resistance;
3. The price is lower than that of bronze and higher than that of cast iron;

Cast Iron

1. Not corrosion resistant;
2. The price is lower than that of bronze and cast steel;

Spool

Bronze

1. Strong low temperature resistance;
2. Seawater corrosion resistance is stronger than stainless steel (304, 316);
3. The price is slightly higher than that of stainless steel;

Stainless Steel

1. It has strong tensile, anti-wear and corrosion resistance, and will not produce corrosion, pitting, corrosion and wear;
2. Stronger than copper;
3. High temperature resistance;

Valve Stem

Stainless Steel 304

1. Acid and alkali resistance;
2. High temperature resistance;
3. The price is lower than stainless steel 316;

Stainless Steel 316

1. It is more corrosion-resistant and acid resistant than stainless steel 304;
2. The price is slightly higher than that of stainless steel 304;

Valve Cover

Bronze

1. Seawater corrosion resistance;
2. The price is slightly higher than that of cast steel and cast iron;

Cast Steel

1. High mechanical strength and toughness;
2. It has special properties such as heat resistance, corrosion resistance and wear resistance;
3. The price is lower than that of bronze and higher than that of cast iron;

Handwheel

Csat Iron

The price is lower than that of bronze and cast copper

Specific differences between us and other suppliers:

Comparison

Product Picture of other low quality supplier

Product Picture of our factory

Other low quality supplier

Consequence

Our Factory

Use effect

In order to reduce the cost, omit raw materials and reduce the internal quality, resulting in the thin wall of the valve body, which accounts for the theme of the valve

Leaving potential safety hazards, the thin wall is easy to fracture or leak the valve under high temperature and high pressure or in operation

It is processed in strict accordance with the standard, with uniform thickness and material

It is safe to use, meets the needs of users, and has a long service life

The valve cover has poor manufacturing quality, uneven thickness and uneven material

The valve cover is prone to damage, sand holes, corrosion or aging

It is processed in strict accordance with the standard, with uniform thickness and material

The valve cover is of good quality, not easy to produce pores, and the product has a long service life

Refurbished valves, some operators sell the used valves for the second time after repainting, which brings serious safety hazards to the project quality

The refurbished valve is easy to cause shell cracking, and the phenomena of running, emitting, dripping and leakage will occur, which will cause oil and gas pipeline explosion in serious cases

Make new valves in strict accordance with the material requirements of customers, and never substitute inferior products for good ones

Meet the hardness and accuracy requirements of standard valves, ensure the quality of valves and ensure the normal operation of equipment

Flange manufacturing quality is poor, with cracks, pores, insufficient thickness and other problems

As a result, the valve is wear-resistant and the pressure bearing is poor. The valve is prone to quality problems and has a short service life

Use materials in strict accordance with national standards

The valve has good wear resistance and pressure bearing performance and is not easy to be damaged

Replace copper valve stem with iron plated valve stem

The performance of substitute materials is unstable, resulting in the decline of valve quality

Select materials in strict accordance with user requirements

High safety factor, reasonable structure and long service life of products

Drawing:


Parameter performance:

Certificates:

Contact with us now

Our mail: hs@cqhisea.com

replace