Diesel Engine Single Gypsy Anchor Windlass - Marine Diesel Engine Anchor Windlass - Hi-sea

Diesel Engine Single Gypsy Anchor Windlass


Diesel Engine Single Gypsy Anchor Windlass




Application

A diesel engine single gypsy anchor windlass is a type of anchor windlass that is powered by a diesel engine and features a single gypsy (a rotating drum that is used to haul in and pay out the anchor chain). This type of windlass is commonly used on medium to large vessels where a high level of anchoring power is required. The diesel engine provides the power needed to operate the windlass, while the single gypsy is used to manage the anchor chain. A chain stopper is typically used to hold the chain in place once the anchor has been deployed, while a capstan or other type of winch may be used to handle the anchor rode (the combination of chain and rope that is used to secure the anchor).

For more marine diesel engine anchor windlass specifications, please click here.

Advantages and Features

1. Contract structure, high strength;

2. Local control and remote control;

3. Easy for installation, maintenance, lubrication and inspection;

4. Corrosion resistance, long lifespan;

5. With or without warping head;

6. With or without drum;

7. Reliable service, high security;

8. Can be customized according to your requirements;

9. Manual or hydraulic brake and clutch;

10. Approved by LR, RINA...


Diesel Engine Single Gypsy Anchor Windlass Structure


We not only provide customers with high-quality products, but also provide complete system solutions and added services for specific customers. Therefore, There are  high competitiveness.

Configuration options

Part Name

Type/Material

Advantages/Disadvantages

Gypsy Wheel

Q345D

It has good comprehensive mechanical properties, good weldability, cold and hot workability and corrosion resistance, and has good low temperature toughness (high strength, good welding performance).

Warping head

ZG270-500

Medium carbon cast steel has certain toughness and plasticity, high strength and hardness, good machinability, acceptable weldability, and poor casting performance than low carbon steel. Casting defects cannot be avoided.

ZG270-500 Precision Casting

High cost and no defects

Q345-B

Good comprehensive performance, good low temperature performance, good cold stamping performance, good welding performance and machinability. (High strength, good welding performance).

Reduction Gearbox

Domestic second-tier brands

Poor quality and short service life.

Domestic first-line brand

Cost-effective and long service life.

*Homemade (recommended)

Good quality, high cost.

Diesel Engine Type

Weichai, Changchai, Yuchai and Jingjiang brand

Large torque in the low and medium speed range, continuous output and strong power

Minimum fuel consumption rate of 200g/kW·h, economical and fuel-efficient

Gear chamber cover, cylinder head cover, closed flywheel housing noise reduction design to reduce noise (low noise)

Good quality, cost-effective, long service life.

Other brands

High power consumption, relatively poor quality.

YANMAR

Good quality, high cost, long delivery time.

Pedestal

Q235-B

Suitable for products with small loads.

Q345-B

High strength and good welding performance.

Due to the fierce market competition, the phenomenon of low quality of other winch suppliers is frequent. What is the difference between us and other low-quality suppliers?

The specific differences are as follows:

Part name

Other low quality suppliers

Result

Our factory

Consequence

Gypsy Wheel

Cast iron

Cast iron has good casting performance, but when the carbon content of cast iron is relatively high, its performance is relatively brittle, and its tensile performance is relatively poor; it is easy to corrode and wear quickly, which is not conducive to load.

Q345D

The Q345D steel plate is preheated before welding to prevent the occurrence of cold cracks. And Q345D has good cold and hot working properties and corrosion resistance, and has good low temperature toughness. Conducive to load, slow wear.

Warping head

ZG270-500

Casting defects cannot be avoided

Q345-B

High welding strength and slow wear.

Reduction Gearbox

Domestic second-tier brands

Poor quality and short service life.

Homemade or domestic first-line brands

Wear-resistant, more matching with the structure of the windlass, and better performance. Good quality and cost-effective.

Diesel Engine Type

Other brands

High power consumption, relatively poor quality.

Weichai, Changchai, Yuchai and Jingjiang brand

Large torque in the low and medium speed range, continuous output and strong power

Minimum fuel consumption rate of 200g/kW·h, economical and fuel-efficient

Gear chamber cover, cylinder head cover, closed flywheel housing noise reduction design to reduce noise (low noise)

Good quality, cost-effective, long service life.

Pedestal

Q235-B

Low strength, suitable for products with small overload; Used for heavy loads winches, wear out quickly and break easily.

Q345-B

Higher strength, slower wear, not easy to break, suitable for both small and large load winches.

Drawing of Diesel Engine Single Gypsy Anchor Windlass



Main Technical Parameter

Main Technical Data Of Windlass
Chain Dia. Working Load Supporting Load Working Speed Warping Load Motor Power
mm KN KN m/min KN kW
14/16/17.5 8.3/10.9/13.0 51/67/80 ≥9 8 5.5
19/20.5/22 15.3/17.9/20.6 95/110/126 ≥9 10 7.5
24/26 24.5/28.7 149/175 ≥9 20 11
28/30 33.3/38.3 202/231 ≥9 30 15
32/34/36 43.5/49.1/55.1 261/294/329 ≥9 30 22
38/40/42 61.4/68.0/75.0 365/402/442 ≥9 40 30
44/46/48 82.3/89.9/97.9 483/526/570 ≥9 50 37
50/52/54 106.3/114.9/132.9 617/664/713 ≥9 50 45
56/58/60 133.2/143.0/153.0 764/816/870 ≥9 60 55
Above specifications only for reference, We can supply various marine windlass according to your requirements.
Diesel Engine Single Gypsy Anchor Windlass in Factory



Maintenance advice:

★ The mechanical part of the machine should work under good lubrication conditions. The machine should be idling for a moment after each refueling to allow the grease to evenly coat the running surface.

★ Refueling parts are butter nozzle, transmission rod, gear, brake lever, etc.

★ The machine body and fixing bolts should be checked frequently for completeness and tightness. The brakes of the machine should be checked regularly to prevent grease from adhering to the braking surface. When the brake belt rivets rub against the brake hub, the brake belt should be replaced in time.

★ What is the condition of the limit bolts (adjustment bolts) of the windlass brake belt? Is it rusted? Special attention should be paid to the screw teeth under the brake lever, that is, after the brake is tightened, check the remaining screw teeth under the brake lever. According to previous experience, there are at least 10 teeth to be assured. The limit bolt is between the brake lever and the brake band, which can be used to adjust the height of the brake lever. The thread of the limit screw is fine. Open the brake lever and slowly adjust the limit bolt until the thread under the brake screw meets the requirements. This bolt should be properly buttered, wrapped in tarpaulin, and checked at least every three months.


Contact with us now

Our mail: hs@cqhisea.com

replace