2.5 m³ Vessel Oily Water Separator - Marine Oil Water Separator - Hi-sea

2.5 m³ Vessel Oily Water Separator

2.5 m³ Vessel Oily Water Separator

Introduction

YWC-2.50 type device is mainly constituted by the 1st stage coalesce, the 2nd stage filter, the 3rd stage membrane, electric control box, oil content meter, MONO pump, pneumatic valve, pressure controller, temperature controller and so on.

The device adopts electrical heating; the 1st stage cone wave plate gravity and coalesce separation; the 1st and the 2nd stage fiber filter and the 3rd stage membrane permeation in order to make the treated bilge water meet the requirements of discharge standard of the resolution of IMP MEPC.107 (49).

Drawing & Specifications


No. Name Material
1 the 1st stage coalescer Assembly
2 the 2nd stage filter Assembly
3 the 3rd stage membrane Assembly
4 Base 8#
5 Piston pump Assembly
6 Oil content meter Assembly
7 Electric control box Assembly
8 Water inlet pipe Q235-B
9 Cock Copper
10 Electrode Assembly
11 Pneumatic valve Assembly
12 Thermometer Assembly
13 Nameplate 316L
14 Duplex pressure gauge Assembly
15 Vacuum pressure gauge Assembly
16 Nameplate 316L
17 Water inlet pipe Q235-B
18 Pneumatic valve Assembly
19 Globe valve Assembly
20 Back to the bilge pipe Q235-B
21 Manual three-way valve Assembly
22 Exhaust pipe Q235-B
23 Flow rate meter Assembly
24 Three water inlet pipe Q235-B
25 Check valve Assembly
26 Safety valve Assembly
27 Medical pump Assembly
28 Recoil hoses Q235-B
29 Medical box Plastic


Rated Capacity (m3/h) Discharged Water Oil Content Electric Heater Power (KW) Electric Motor Power (KW) Electrical System Suction Head Discharged Water Pressure Outline Dimension (mm)(L×W×H) Base Dry Weight Wet Weight Applicable Vessel (KDWT)
2.5 ≤15ppm 6 1.5 AC 380V/50Hz/3φ, AC 415V/50Hz/3φ, AC 440/60Hz/3φ, AC 480V/60HZ/3φ, etc. 6m (H2O) 5-10m (H2O)
1900×1120
×1900
8# 1500 2800 50-100
IACS Certificate Options: BV, CCS, NK, DNV, GL, IRS, ABS, LR, RMRS, RINA


Contact with us now

Our mail: hs@cqhisea.com

replace