1 m³ Oil Water Separator Treator - YWC Series 15ppm Bilge water separator - Hi-sea

1 m³ Oil Water Separator Treator

1 m³ Oil Water Separator Treator

Introduction

This device can be used to treat the oily bilge water in order to reach the requirements of IMO.MEPC.107 (49) resolution, which is also called 15ppm bilge separator.

The device adopts electrical heating; the 1st stage cone wave plate gravity and coalesce separation; the 1st and the 2nd stage fiber filter and the 3rd stage membrane permeation in order to make the treated bilge water meet the requirements of discharge standard of the resolution of IMP MEPC.107 (49).


Drawing & Specifications



No. Name Materail
1 the 1st stage coalescer Assembly
2 the 2nd stage filter Assembly
3 Flow rate meter Assembly
4 the 3rd stage membrane Assembly
5 Vacuum pressure gauge Assembly
6 Nameplate of product 316L
7 Instrument panel Assembly
8 Duplex pressure gauge Assembly
9 Safety valve Assembly
10 air dischargeing cock Assembly
11 Thermometer Assembly
12 Electric control box Assembly
13 Check valve Assembly
14 Air-electric transter Assembly
15 Ball valve Assembly
16 Pheumatic valve Assembly
17 Base Q235-B
18 Oil content meter Assembly
19 Medical pump Assembly
20 Piston pump Assembly
21 Fixed mount of electric box Assembly
22 Manual three-way valve Assembly
23 Pheumatic three-way valve Assembly
24 Medical box Plastic
25 Electric heater Assembly
26 Ball valve Assembly

Rated Capacity (m3/h) Discharged Water Oil Content Electric Heater Power (KW) Electric Motor Power (KW) Electrical System Suction Head Discharged Water Pressure Outline Dimension (mm)(L×W×H) Base Dry Weight Wet Weight Applicable Vessel (KDWT)
1 ≤15ppm 6 0.75 AC 380V/50Hz/3φ, AC 415V/50Hz/3φ, AC 440/60Hz/3φ, AC 480V/60HZ/3φ, etc.

6m

(H2O)

5-10m

(H2O)

1050

×

1000

×

1620

6# 800 1200 5-10
IACS Certificate Options: BV, CCS, NK, DNV, GL, IRS, ABS, LR, RMRS, RINA


Contact with us now

Our mail: hs@cqhisea.com

replace