4000L HM High Speed Oil Centrifugal Separator
Product Description
The separator is a component operating in an integrated system including a monitoring system.
Basic Principles of Separation
The purpose of separation can be to free a liquid of solid particles; separate two mutually liquids with different densities while removing any solids present at the same time; separate and concentrate solid particles from a liquid.
Operation Limits
Feed temperature：0℃ to+100℃
Ambient temperature: +5℃ to +55℃
Discharge Intervals: 2 minutes to 4 hours
Maximum allowed density of operating liquid: 100Kg/m³
Viscosity max. 600 cSt at 50℃
Max. Light phase density， mineral oil/fresh water separation: 991 KG/m³ at 15℃
Max. Allowed speed: 12450r/minute
Not to be used for liquids with flashpoint below 60℃
Risk for corrosion and erosion has to be investigated in each case by the application centre.
Remote restart allowed under certain conditions, see interface description.
Technical Data
| General technical data | ||
| Motor power: 50Hz/60Hz | Value | Unit |
| Gear ratio | 283/70 | 50Hz |
| Gear ratio | 235/70 | 60Hz |
| Alarm levels for vibration monitor, connection 752,1st/2nd | 0,15/0,3 | mm |
| Bowl max. inner diameter | 208,5 | mm |
| Discharge interval, min./max. | 2/240 | minutes |
| Max. density of operating liquid | 1000 | Kg/m³ |
| Max. density of feed/sediment | 1100/2367 | Kg/m³ |
| Min./Max. ratio of density | 0,795/0,977 | |
| Feed temperature, min./max. | 0/100 | ℃ |
| Max. running time without flow, | ||
| empty bowl | 30 | minutes |
| filled bowl | 30 | minutes |
| Bowl body material | AL 111 2377-02 | |
| Other metallic materials than stainless steel in bowl: | Yes | |
Related products for "4000L HM High Speed Oil Centrifugal Separator"
