1% Aqueous Film Forming Foam Fire Extinguishing Agent
Description：
1% aqueous film forming foam extinguishing agent is made with fluorocarbon and hydrocarbon surfactants as basic material. It is a kind of high efficient foam extinguishing agent with better fluidity faster extinguishment good closure and longer storage period. It is also applicable to "Sub-Surface Injection" System to put out large range's fire of oil stock tank. Among all products, this one has fastest extinguish speed and highest efficiency.
Standard: GB15308-2006 Foam Fire Extinguishing Agent; GB/T19001-2016/ISO 9001:2015; GB15308-2006;GB/T24001-2016/ISO 14001:2015; GB/T28001-2011/OHSAS 18001:2007, MSC.327(90), MSC/Circ.1312, etc.
Certificate: CCS
Specification:
Solidification point: -30℃ cold resistance, sea water resistance
Scope of application: It is a low expansion foam fire extinguishing agent.
Product packaging and storage:
1.This product is packed with plastic barrel in the following specifications: 25KG, 50KGL, 100KG or 200KG.
2.storage temperature : 0℃ to 45℃
3.Effective life ：8 years
4.Applicable water category: fresh water and seawater, mixing ratio of 6%;
5.Solidification point (eigenvalue) : < -34℃;
6.Freezing resistance, thawing resistance: no visible stratification and heterogeneous;
7.PH value (before and after temperature treatment) : 6.0 to 9.5;
8.Surface tension (before temperature treatment)：≤1.9mN/m；
9.Diffusion coefficient: positive value
10.Corrosion rate / [mg/(d.dm2)] : Q235A steel sheet: ≤0.3; 3A21 aluminum sheet: ≤0.1;
11.Foaming expansion rate (before temperature treatment):≥10.6;
12.The 25% drainage time (before temperature treatment): ≥ 4.4min;
13.Fire rating: Class IA, mandatory foaming, under sea water conditions, fire extinguishing time ≤3min, fire resistance time ≥11min; under fresh water condition, fire extinguishing time ≤2min, fire resistance time ≥11min;
Picture of 1% aqueous film forming foam extinguishing agent：
Related products for "1 percent Aqueous Film Forming Foam Fire Extinguishing Agent"
.jpg)
